PoE Splitter 12Vdc or 24vdc SPLIT POWER & DATA out, max. 25 Watts. Data + PoE in.

Poe splitter with 12 or 24 volts out, max. 25 watts. Data + PoE in. Data out. Voltage out

kr300.00
Tax excluded

Splitter for PoE via Ethernet cable
LAN with PoE in, gives LAN without PoE out
12 VDC 2A or 24 VDC 1A next to other equipment

Reference: ETH-POE12-24
lens In stock
Quantity
Wishlist
Compare

help_outlineAsk about product

Poe splitter with 12 or 24 volts out, max. 25 watts. Data + PoE in. Data out. Voltage out

 

Download PDF file_download Downloads

12/24 V POE Splitter.

Use the network cable as voltage source for network equipment without PoE.

With this splitter avoids separate power supplies for Access Points, surveillance cameras and other network equipment without PoE Support. By using a PoE switch or an "injector" you can settle for a single network cable that both transfers data and voltage between the switch and the connected network equipment. The splitter has two outputs - one for transferring data via network cable and a DC voltage output to supply the connected equipment.

Data sheet

Standarder
Overholder IEEE802.3at PoE standarden samt IEEE802.3 / 3u / 3ab 10/100/1000 Base-T
Tilbehør
Leveres med DC/DC kabel på 10 cm med 2,5/5,5 mm og 2,5/5,5 mm DC-stik. Samt netværkskabel på 10 cm til at sætte imellem splitter og udstyret. Op til 100 meter mellem PoE switch og tilsluttet udstyr
Stik
1 x RJ45 til indgående strøm og data, 1 x RJ45 til udgående data, 1 x DC hun 2,5/5,5 mm til udgående spænding
Understøtter
10/100/1000 Mbit Base-T
Strømforsyning
Strømforsynes af PoE (52 ~ 56 VDC) ETH-POE12-24 giver enten 12 volt 2A eller 24 volt 1A. 12 eller 24 volt vælges via DIP switch
Udgangsspænding
12 volt 2A eller 24 volt 1A. 12 eller 24 volt vælges via DIP switch

Specific References

UPC
20932

No customer reviews for the moment.